Mold Specialties 

Mold Release & Protection

"2011 - Food Grade Silicone Mold Release"

2011 - Food Grade Silicone Mold Release

RM 80.00/can MYR
A light duty and effective mold release for many plastics, rubber and other materials found in mold operations.
  • Provides excellent lubricating and release of parts
  • Sprays in any direction
  • Non-staining and non-corrosive formula
  • Performs at temperatures between 40°F – 550°F (4°C – 228°C)
  • Meets 21CFR181.28 (Release Agent)

Applications:  Plastic injection molding using ABS, PC, acrylic and other plastics; blow mold and compression mold operations; extruders, castings, wax, rubber and other applications requiring effective parts release.Container Size: 16 oz.
Net Weight: 11 oz/ 325 ml
Case Pack: 12

"3091- Mold & Die Protector"

3091- Mold & Die Protector

RM 51.00/can MYR
For maximum storage protection of tools, jigs, hardware, molds, dies, and bare metal surfaces. Excellent for long distance shipping. -Penetrates metal pores and spreads over entire surface to seal out air and moisture.
  • Translucent waxy film that protects against dust, grime, and moisture
  • Neutralizes fingerprints
  • Ideal for short or long-term storage

Applications: bare metal, molds, dies, tools, jigs, etc.
Container Size: 16 oz.
Net Weight: 12 oz/ 355 ml
Case Pack: 12


"3090-Tool & Die Saver"

3090-Tool & Die Saver

Provides 12-24 months indoor/outdoor storage protection for tools, dies, molds and tooling.  Safe Lanolin-based, greasy film that is easy to apply and remove.
  • Won’t harden or crack with age
  • Protect valuable parts and equipment from rust and corrosion
  • Seals out air & moisture and neutralizes acid oxidation
  • Non-staining formula
  • Remove with #3095 Mold Cleaner

Applications:  Use on molds, dies, tools and other equipment requiring short or long term corrosion protection.IMPORTANT NOTE : Minimum Purchase = 12 cans Container Size: 16 oz.
Net Weight: 11 oz/ 325 ml
Case Pack: 12

"3095 - Mold Cleaner"
3095 - Mold Cleaner
Excellent cleaning power that works fast to dissolve and remove silicone, grease, oil, and residue from molds, dies, and other tooling
  • Evaporates quickly and leaves no residue that causes mold imperfections
  • Nonflammable for added safety
  • Remove moisture, dirt, oils, release agent residue and other contaminants quickly without removing the mold from the machine
  • Non-abrasive, non-conductive and non-corrosive
  • Does not contain Trichloroethylene or Perchloroethylene solvents not allowed in certain uses
Applications:  use on all metal molds, pins, dies, tooling, and other equipment in the work area. Safe on most plastics. Check compatibility before use.IMPORTANT NOTE : Minimum Purchase = 12 cans Container Size: 16 oz.
Net Weight: 10.5 oz/ 311 ml
Case Pack: 12